Skip to content

Grasscloth Installation in Coconut Creek, FL

The short answer

Grasscloth works well in climate-controlled Coconut Creek rooms such as living areas, bedrooms and offices. It needs a pigmented primer, nonstaining paste, careful roll sequencing and an installer who accepts visible seams as part of the look.

Grasscloth suits the relaxed, nature-forward style that many Coconut Creek homeowners gravitate toward. Its woven texture softens bright, open rooms and pairs well with rattan, light wood and linen furnishings. But it is a handmade material with its own rules: it marks if paste touches the front, it shades unevenly from roll to roll, and its seams never vanish the way a printed paper's can. From our base in Pompano Beach, roughly five miles east, we install grasscloth throughout ZIP codes 33066 and 33073. If you are weighing it for a room, this page lays out what to expect before you order.

Honest expectations about the material

Grasscloth is made from plant fibers such as sisal, jute, hemp or seagrass woven into a mat and glued to a paper backing. Because fibers take dye unevenly and are woven in small runs, color and density vary. When two strips meet, you will see the change; when the next strip goes up, it may be slightly darker or lighter again. Designers often love this, but it can disappoint a buyer who expected wall-to-wall uniformity.

We show clients a few strips laid out side by side before cutting. If the variation is more than you are comfortable with, that is the moment to pause and reconsider, not after the wall is finished.

Rooms where it fits and rooms to skip

The material does best where humidity is stable and hands rarely touch it. Coconut Creek homes run air conditioning most of the year, which keeps interior rooms consistent. The trouble spots are places that swing between damp and dry.

  • Good fit: living rooms, dens, primary bedrooms, dining rooms, offices
  • Good fit: the back wall of built-in shelving or a niche
  • Use caution: hallways where kids and pets brush the walls
  • Avoid: full bathrooms, laundry rooms and walls around kitchen sinks
  • Avoid: walls next to doors that open to the patio throughout the day

Prep that keeps the backing from showing

Grasscloth's backing is thin, and some open weaves let the wall color peek through. Patchy walls, with white compound next to tan paint, can show as faint blotches. We fill and sand every hole, then roll on a pigmented primer, often tinted close to the grasscloth's base color, so the surface underneath is uniform.

Builder-grade flat paint is common in planned communities across this part of Broward County. It is porous and absorbs paste unevenly, so priming is not optional. On walls that previously held wallpaper, we remove it and wash off the old adhesive before priming.

Our hanging method

We start by checking that every roll comes from the same lot and numbering strips in the order they will go up. Paste goes on the back with a roller, evenly and without excess near the edges, and the strip is folded and rested for the time the maker specifies so the backing relaxes.

Hanging uses a soft natural-bristle brush instead of a hard smoother, because pressure crushes fibers and leaves shiny streaks. Seams are butted and pressed lightly with fingertips or a soft roller. Edges at the ceiling and baseboard are trimmed with a straightedge and a new blade; on grasscloth, a dull blade frays the cut almost immediately.

If a drop of paste reaches the face, we blot it right away with clean water. Rubbing spreads it and leaves a dark mark that cannot be removed later.

Faux grasscloth as an alternative

For kitchens, bathrooms or busy family spaces, printed or embossed vinyl versions mimic the woven look and stand up to wiping. They also pattern-match more evenly, so the seams are less visible. Some homeowners use real grasscloth in the living room and faux in a nearby powder room for a consistent feel without the risk.

Care and the service area

Keep grasscloth dusted with a soft brush and away from water. Sun through west windows will fade natural dyes over time, so blinds or UV film help preserve the color. We serve Coconut Creek along with Margate, Deerfield Beach, Parkland, North Lauderdale and Lighthouse Point.

More services in Coconut Creek

Related

What to expect

How a visit goes

  1. Clear scope before work begins

    After measuring and checking the walls, we explain what prep is needed, how many rolls to order and how long the job should take.

  2. Patterns that line up

    We plan seam placement around windows, doors and corners so repeats stay aligned from one strip to the next across the whole room.

  3. Respect for your home

    Drop cloths go down first, paste is wiped off trim as we go, and we leave the room ready to use at the end of each day.

FAQ

Common questions

Don’t see your question? Call (561) 823-3201 and we’ll talk it through.

Why do grasscloth seams show?

The fibers are natural and cannot be printed to match, so each strip meets the next with a visible change in texture and shade.

Is grasscloth hard to clean?

It cannot be scrubbed. Dust it with a soft brush and blot spills immediately with a barely damp cloth.

Can grasscloth go in a Coconut Creek condo?

Yes, in climate-controlled living spaces. Check your association's contractor rules for scheduling and parking.

Should I order extra grasscloth?

Yes, from the same lot. Extra allows us to sequence strips for the closest shading and covers trimming waste.

Can grasscloth be hung over textured walls?

Light texture is fine after sanding and priming. Heavy texture should be skimmed smooth first.

Does grasscloth hold up in humidity?

In rooms with steady AC it does well. Constant swings between damp and dry can open seams, which is why we avoid bathrooms.

Ready to talk about your walls?

Tell us which room you are thinking about, where you live and what paper you have in mind. We will set up a visit to measure and look at the surface.

Request Service Call (561) 823-3201
Call (561) 823-3201 Request Service