Skip to content

Mural Wallpaper Installation in Margate

The short answer

We install stock and custom wall murals in Margate homes, condos and townhomes. The process is a site measure for the print order, wall smoothing and primer, then numbered panels hung to a level line and matched seam by seam, usually in one day per wall.

Murals have moved well beyond the forest scenes of decades past. Today Margate homeowners order everything from oversized palm fronds and abstract washes to city skylines and custom photographs printed to fit a single wall. Because a mural is one image split into panels, it asks more of the installer than repeating wallpaper: the panels have to line up across every seam, the image has to sit level on walls that may not be, and the focal point has to land where it was meant to. We install wall murals throughout Margate and ZIP 33063, a short drive of about seven miles southwest of our Pompano Beach base.

Popular places for a mural in Margate homes

The most requested spots follow the layout of homes in the area. In single-story ranch houses, the long living room wall opposite the sofa is a frequent choice because it is wide enough to show a landscape without interruption. Children's bedrooms get murals more than any other room, from jungle scenes to starry ceilings. In condos and villas, a dining wall or the end wall of an entry hall gives a strong first impression in a modest footprint.

Home offices are a newer favorite. A calm, textured mural behind the desk looks good on video calls and makes a spare bedroom feel like a dedicated workspace.

  • Living room feature walls
  • Kids' rooms and nurseries
  • Dining areas in condos and villas
  • Entry and hallway end walls
  • Office backdrops
  • Ceilings in small rooms

Sizing the print correctly

A mural that arrives too small cannot be stretched. We visit before you order and measure the wall at several heights and widths, since ceilings and floors in many homes are slightly out of level. We then give you final dimensions that include extra image on each edge for trimming, which is what most printers request.

We also map the image against the room. If a bed, TV or large mirror will cover the middle of the wall, we can suggest shifting the crop so faces, horizons or key shapes stay visible. Outlets and switches get noted too, since cutting through an important detail is avoidable with planning.

Material choices and the Margate climate

Most residential murals print on nonwoven backing, which holds its shape when pasted and comes off later in large pieces. It is a good fit for South Florida because it is less likely to stretch or shrink with humidity. Vinyl-coated mural papers add a wipeable surface for kids' rooms and kitchens. Self-adhesive versions are popular online, but they often struggle on textured walls and in rooms that warm up when the AC cycles off.

Bright afternoon sun can fade inks over time, particularly on west-facing walls. If the mural wall gets direct light, sheers or UV window film help preserve the colors.

Prep and installation steps

Large printed images reveal every flaw underneath, so prep gets real attention. We fill holes, sand ridges, skim knockdown or orange peel texture if needed, and finish with a wallpaper primer that helps paste grip and dry evenly. On walls that face the outside of a block home, we check that the surface is dry and free of past moisture problems first.

On installation day we lay out the panels in order, verify the image flows correctly, and snap a level line for the first piece. Each panel is pasted per the maker's directions, positioned, matched at the seam at several heights, and smoothed outward. Trimming at the ceiling and baseboard happens once the full width is in place. Most single-wall murals are complete the same day.

Keeping your mural looking good

Allow the adhesive a few days to cure before pressing furniture flat against the wall. Keep indoor temperature and humidity steady, especially in the wet season from May through October, when rooms left without AC can become damp quickly.

Clean washable murals with a soft damp cloth and mild soap; dust other types gently. If anything lifts at a seam, contact us early, since a small fix is simple before the edge catches and tears.

More services in Margate

Related

What to expect

How a visit goes

  1. Clear scope before work begins

    After measuring and checking the walls, we explain what prep is needed, how many rolls to order and how long the job should take.

  2. Patterns that line up

    We plan seam placement around windows, doors and corners so repeats stay aligned from one strip to the next across the whole room.

  3. Respect for your home

    Drop cloths go down first, paste is wiped off trim as we go, and we leave the room ready to use at the end of each day.

FAQ

Common questions

Don’t see your question? Call (561) 823-3201 and we’ll talk it through.

Can you install a mural I already ordered?

Yes. Share the product details and dimensions, and we will check that the print size fits your wall before installation day.

What if my wall is textured?

Most murals need a smooth surface. We usually skim coat textured walls first so the texture does not show through the image.

Can a mural go on a ceiling?

Yes, ceiling murals are possible, though they take more time and planning than a standard wall.

Are murals hard to remove later?

Nonwoven murals hung over primer typically peel off in large pieces with little wall damage.

How long does mural installation take in Margate?

Usually one day for a single wall, plus any extra time needed for skim coating and drying.

What nearby areas do you serve?

We also install murals in North Lauderdale, Coconut Creek, Parkland, Oakland Park and Deerfield Beach.

Ready to talk about your walls?

Tell us which room you are thinking about, where you live and what paper you have in mind. We will set up a visit to measure and look at the surface.

Request Service Call (561) 823-3201
Call (561) 823-3201 Request Service