Skip to content

Wallpaper Mural Installers for Wilton Manors Homes

The short answer

Mural installation in Wilton Manors begins with measuring the wall and confirming the print size and bleed before ordering. We then prepare a smooth, primed surface and hang the numbered panels in order, aligning the image at every seam.

A printed mural can make a modest room in Wilton Manors feel like a destination: a lush jungle scene in a small bedroom, a vintage map in a study, a photographic seascape at the end of a living room, or abstract brushwork behind a dining table. Because so many homes here are cozy mid-century houses, townhomes and condos, a mural is often the boldest design move in the house, and it needs to be installed with real precision. We come down from Pompano Beach, about 9 miles north, to hang murals throughout Wilton Manors. Here is our process from choosing the wall to the final trim.

Why murals suit compact homes

In a smaller room, a mural acts like a window. Landscapes, skies and scenes with a horizon line add a sense of distance that a flat paint color cannot. A single mural wall can also replace a cluster of art, which keeps a compact space from feeling cluttered.

The best results come from walls without many interruptions. A wall behind a bed, the end wall of a living area or a dining wall without windows gives the image room to breathe. If the only option has a doorway or window, we talk through how the image will be cut around it and whether a different composition would work better.

Before you order: what we check

Mural panels are printed to your measurements, so an error at this stage is expensive in time. We recommend letting us measure, especially in older homes where ceilings and floors may not be perfectly level. These are the details we confirm.

  • Wall width and height at several points, not just one
  • Bleed allowance on all edges for clean trimming
  • Where outlets, switches, vents and thermostats fall in the image
  • Panel material: paper, non-woven, vinyl or peel-and-stick
  • Adhesive type and whether panels overlap or butt together

Prepping walls in older Wilton Manors houses

Murals often include broad, smooth areas, such as open sky or soft gradients, that reveal any bumps or texture behind them. Older plaster, repaired drywall and walls with years of paint buildup need attention first. We patch, sand and skim until the surface is flat, then apply a wallcovering primer that helps panels slide into position and protects the wall for later removal.

For walls facing the exterior, we also look for any sign of moisture through the block. Covering a damp wall with a printed vinyl can trap that moisture, so any problem is better solved before the mural goes up.

Hanging the image piece by piece

We lay out every panel in order and inspect the print first. The first panel is placed against a true vertical line, which we mark with a level or laser, because aligning to a crooked corner would throw the whole image off. Each panel after that is matched to the image itself, with special attention to the lines that cross seams.

We trim top and bottom with a sharp blade, cut outlet openings precisely and reinstall covers. A typical single mural wall is completed in a day.

Pasted murals need a little time to settle once they are up. Small bubbles that appear in the first hours usually flatten as the adhesive dries, so we ask that you avoid pressing on the panels, leaning furniture against them or mounting shelves and art for a couple of days. If anything still looks raised after that, a quick follow-up visit takes care of it. Leftover offcuts are worth keeping, since a matching scrap makes it far easier to patch a scuff or a ding in the future without reprinting a whole panel.

Making the colors last

South Florida sunlight is intense, and murals across from bright, unshaded windows can soften in color over time. Sheer curtains, blinds or UV film reduce that effect. Indoor humidity also matters, especially during the long wet season, so a steady air-conditioning setting helps the panels stay flat and tight.

If you rent or plan to move, ask us about non-woven murals that are designed to strip off cleanly later. We install murals in Wilton Manors and also in Oakland Park, Lauderdale-by-the-Sea, North Lauderdale, Margate and Lighthouse Point. Send a link to the mural and a photo of the wall, and we can confirm sizing and prep before you order.

More services in Wilton Manors

Related

What to expect

How a visit goes

  1. Clear scope before work begins

    After measuring and checking the walls, we explain what prep is needed, how many rolls to order and how long the job should take.

  2. Patterns that line up

    We plan seam placement around windows, doors and corners so repeats stay aligned from one strip to the next across the whole room.

  3. Respect for your home

    Drop cloths go down first, paste is wiped off trim as we go, and we leave the room ready to use at the end of each day.

FAQ

Common questions

Don’t see your question? Call (561) 823-3201 and we’ll talk it through.

Can a mural make a small room feel bigger?

Often, yes. Scenes with depth, such as landscapes or skies, can make a wall appear to recede and open up a compact room.

Do you install murals in condos and townhomes?

Yes. We coordinate with building rules on access, parking and work hours.

What if my wall is not perfectly level?

We measure at several points and recommend adequate bleed so the image can be trimmed cleanly despite uneven ceilings or floors.

Are there murals that remove easily?

Non-woven murals are usually designed to strip off in full panels when hung over a properly primed wall.

Can you install a mural over existing wallpaper?

We do not recommend it. The old paper should be removed and the wall primed so the mural lies flat and stays put.

Ready to talk about your walls?

Tell us which room you are thinking about, where you live and what paper you have in mind. We will set up a visit to measure and look at the surface.

Request Service Call (561) 823-3201
Call (561) 823-3201 Request Service