Skip to content

Accent Wall Installation in Highland Beach, FL

The short answer

An accent wall in Highland Beach usually means one solid wall papered to balance large windows and bright ocean light. We help pick the wall and a material suited to coastal humidity, prepare the surface, and hang it in a single visit for most rooms.

Highland Beach homes tend to share one design problem: so much of the living space is glass, slider and view that there are very few solid walls left to work with. That makes the one or two walls you do have more valuable, not less. A single papered accent wall can anchor a living room that otherwise feels like it is floating, give a guest suite some personality, or turn the wall behind a bed into the focal point when the blinds are closed at night. Creative Wallpaper Installer drives up from Pompano Beach, roughly nine miles south, to hang accent walls in condos and single-family homes along this stretch of Palm Beach County. This page covers how we pick the wall, which materials hold up near the ocean, and what a typical one-wall project looks like from first visit to cleanup.

Choosing the right wall when most of the room is glass

In a room with a wall of sliders, the eye goes outside first. The accent wall should give it somewhere to land when it comes back in. Most of the time that is the wall facing the windows, because it catches the most light and is seen from the entry. In bedrooms it is usually the headboard wall, and in dining areas it is the wall the table is pushed against.

We look at a few practical things before you fall in love with a pattern. Does the wall have thermostat controls, outlets or a panel box that will interrupt the design? Is there a soffit or beam that cuts across the top? Does the wall run into a curved corner or an angled ceiling? None of these rule a wall out, but they change how a pattern should be centered and where seams will fall.

Materials that suit an oceanfront address

Highland Beach sits on a barrier island between the Atlantic and the Intracoastal, so humidity and salt air are part of daily life, and the air conditioning runs for most of the year. That swing between cool, dry indoor air and damp outdoor air shows up at seams and edges first. For accent walls near sliders or in rooms where doors are opened often, we tend to steer people toward papers that tolerate moisture well.

Options we commonly suggest for this area:

  • Non-woven papers, which are dimensionally stable and come off cleanly when you redecorate later.
  • Vinyl-coated or solid vinyl wallcoverings for walls near kitchens, bars or bathrooms.
  • Textured weaves and embossed papers for a living room wall that needs depth without a busy print.
  • Metallic and mica finishes, which pick up the reflected light from the water, if the wall is flat enough to hide nothing.
  • Natural fibers such as grasscloth, reserved for walls away from direct sun and moisture.

Getting a condo wall ready

Many of the units here are in concrete buildings with finished drywall or plaster over block. Those walls are solid, but they often carry years of semi-gloss paint, patched anchor holes from old artwork, and the occasional hairline crack from the building moving. Wallpaper telegraphs every bump underneath it, so the preparation is where most of the quality comes from.

Our prep on an accent wall typically includes filling and sanding holes, skimming rough areas, wiping down and drying the surface, and rolling a wallcovering primer that lets the paste grab and makes future removal easier. If a wall shows signs of moisture coming through from the exterior, we will tell you before anything is hung, because no paper fixes a water problem.

How a one-wall project usually runs

Most accent walls are a one-day job. We confirm the roll count before you order, so you are not short a strip or stuck with several extra rolls from a different print run. On install day we protect floors and furniture, remove cover plates, prime if it was not done ahead, and plot the layout so the pattern is centered on the wall or on the bed, sofa or console that will sit in front of it.

Strips are hung, matched and trimmed at the ceiling and baseboard, then the plates go back on and the room is cleaned. If your building requires contractors to check in, use a service elevator or work within set hours, we plan around that ahead of time so nothing stalls on the day.

Ideas that work well in Highland Beach homes

Coastal does not have to mean seashells. Some of the accent walls that tend to look right in bright, view-oriented rooms are quieter than people expect: a soft linen texture behind a white sofa, a large-scale botanical in muted greens in a guest room, a tonal stripe that makes a low ceiling read taller, or a deep navy or charcoal wall that frames the window opposite it at sunset.

If you are also considering a feature on a ceiling, inside a bookcase or in a powder room, it can make sense to do those during the same visit. Homeowners in nearby Boca Raton, Deerfield Beach and Hillsboro Beach often combine two small spaces into one appointment for the same reason.

More services in Highland Beach

Related

What to expect

How a visit goes

  1. Clear scope before work begins

    After measuring and checking the walls, we explain what prep is needed, how many rolls to order and how long the job should take.

  2. Patterns that line up

    We plan seam placement around windows, doors and corners so repeats stay aligned from one strip to the next across the whole room.

  3. Respect for your home

    Drop cloths go down first, paste is wiped off trim as we go, and we leave the room ready to use at the end of each day.

FAQ

Common questions

Don’t see your question? Call (561) 823-3201 and we’ll talk it through.

Can I put an accent wall in a rental or a condo I may sell soon?

Yes. A non-woven paper over a proper primer can usually be peeled off in large pieces later, leaving the wall in good shape for paint. We can recommend strippable options if resale is on your mind.

Which wall should be the accent wall?

Usually the first solid wall you see when entering the room, or the wall behind a bed or sofa. In rooms with large windows, the wall facing the glass often works because it is well lit and visible from most of the room.

Will the ocean air affect the wallpaper?

Humidity and salt air can stress seams near sliders that are opened often. Choosing a moisture-tolerant paper, priming correctly and keeping the AC running steadily all help the wall stay flat.

How long does an accent wall take?

Most single walls are finished in one visit. Very tall walls, walls with many cutouts, or papers that need special handling can take longer, and we will tell you before we start.

Do I need to buy the paper before you visit?

It helps to wait until we have measured. We calculate rolls based on the wall size and the pattern repeat so you order the right amount from one batch.

Do you work in Highland Beach condo buildings with contractor rules?

Yes. Let us know your building's hours, check-in process and elevator requirements, and we will schedule the work to fit them.

Ready to talk about your walls?

Tell us which room you are thinking about, where you live and what paper you have in mind. We will set up a visit to measure and look at the surface.

Call (561) 823-3201 Request Service