Skip to content

Wall Mural Installation in Highland Beach, Florida

The short answer

Mural installation in Highland Beach starts with exact wall measurements so the print is sized correctly, then careful prep and panel alignment. Most residential murals are hung in a day once the wall is ready.

A wall mural is printed as a single image split across several panels, and it only works if those panels line up exactly. A tropical scene that drifts a quarter inch at each seam, or a horizon line that tilts across a long living room, is hard to unsee. Creative Wallpaper Installer travels north from Pompano Beach, about nine miles, to install murals in Highland Beach residences, from a wide landscape across a great room to a playful print in a grandchild's bedroom. We handle the measuring before you order, the wall prep, and the panel-by-panel hanging that keeps the picture whole.

Measure first, order second

Murals are usually printed to your dimensions, so a measuring error becomes an expensive reprint. Walls are rarely perfectly square, especially in older buildings where floors and ceilings may slope slightly. We measure height at several points along the wall and width at the top, middle and bottom, then add bleed so the image can be trimmed cleanly at the ceiling, baseboard and corners.

We also look at where the important part of the image will sit. If a sofa, bed or console will cover the lower third of the wall, you probably do not want the focal point of the scene there. If the mural wraps a corner, we decide which part of the picture should land on each side so nothing important gets folded into the corner.

  • Height at the left, center and right of the wall
  • Width at three heights, plus notes on any out-of-square corners
  • Locations of outlets, switches, vents, thermostats and door casings
  • Furniture and art placement that will cover part of the image

Picking a mural material for coastal living

Mural printers offer several substrates. Non-woven bases are easy to handle and remove later. Vinyl-coated and type II commercial vinyl stand up to cleaning and humidity, which matters in kitchens, playrooms and rooms that open to a balcony. Peel-and-stick versions exist, but in Highland Beach humidity they can lift at the edges unless the wall and conditions are ideal, so we usually recommend a pasted product for anything meant to last.

Finish matters as much as base. A matte finish hides small wall flaws and reduces glare from bright windows. Satin or textured finishes add depth to photographic images but show surface imperfections more.

Prepping the wall for a seamless image

A mural shows every flaw in the wall behind it, often more than a patterned paper, because large areas of flat color and sky give the eye nothing to hide behind. We fill holes, sand ridges, skim rough patches and prime with a wallcovering primer. Darker existing paint colors may need an extra coat so they do not shadow through lighter parts of the print.

If the wall is painted in high-gloss enamel, we scuff and prime it so the paste bonds. Concrete-block exterior walls in some homes can feel cool and damp in summer; we check for moisture before committing to any wall.

Installation day

Mural panels are numbered. We lay them out in order and check the image against the measurements before anything is pasted. A plumb line is set for the first panel, which controls the alignment of every panel after it. Each subsequent panel is matched to the image on the previous one, smoothed from the center outward, and trimmed once the run is complete.

When the last panel is up, we reinstall outlet covers, inspect every seam in raking light, and clean the area. For a typical bedroom or living room wall, that all fits into one working day.

A mural is hung in a specific order that the printer sets, and panels usually overlap slightly or butt together depending on the product. We read the instructions that come with your mural before installation day, because a butted mural trimmed like an overlap mural, or the reverse, can leave a visible gap or a doubled strip of image.

Mural ideas that suit Highland Beach interiors

Many homeowners here prefer subtle images that complement the view rather than compete with it: soft watercolor palms, misty horizons, abstract brushstrokes in sand and sea tones, or oversized botanicals in a muted palette. Bolder choices, like a vintage map, a city skyline or a jungle scene, can be striking in a den, media room or child's bedroom where there is no ocean view to balance. We have no favorite style; the right mural is the one you will still enjoy looking at in a few years.

If you have a mural in mind for another property in Boca Raton, Lighthouse Point or Coconut Creek, we can plan both projects together.

More services in Highland Beach

Related

What to expect

How a visit goes

  1. Clear scope before work begins

    After measuring and checking the walls, we explain what prep is needed, how many rolls to order and how long the job should take.

  2. Patterns that line up

    We plan seam placement around windows, doors and corners so repeats stay aligned from one strip to the next across the whole room.

  3. Respect for your home

    Drop cloths go down first, paste is wiped off trim as we go, and we leave the room ready to use at the end of each day.

FAQ

Common questions

Don’t see your question? Call (561) 823-3201 and we’ll talk it through.

Do you supply the mural or do I order it?

Most clients order from the mural company of their choice. We provide the measurements and bleed requirements so the print arrives sized correctly for your wall.

Can a mural go over textured walls?

Light texture can often be skimmed smooth first. Heavy knockdown or popcorn-style textures need more prep, and we will assess the wall before you order.

Will peel-and-stick murals work in Highland Beach?

They can lift in humid conditions. For long-term use we usually suggest a pasted non-woven or vinyl mural.

What if the wall is not square?

That is common. We measure in several places and plan the bleed so the image can be trimmed to the actual edges without losing important details.

How long does it take?

Most single-wall murals take one day, including protection and cleanup. Very large walls or murals that wrap corners may need longer.

Can a mural be removed later?

Non-woven murals over the right primer can usually be stripped in sheets. Vinyl murals often peel off, leaving a backing that soaks off with water.

Ready to talk about your walls?

Tell us which room you are thinking about, where you live and what paper you have in mind. We will set up a visit to measure and look at the surface.

Request Service Call (561) 823-3201
Call (561) 823-3201 Request Service